¶¶Òõ¶ÌÊÓƵ

Dr Jong-Leng Liow

Dr Jong-Leng Liow

Senior Lecturer
¶¶Òõ¶ÌÊÓƵ
School of Eng & Tech

Dr Jong-Leng Liow is a Senior Lecturer in the School of Engineering and Information Technology at ¶¶Òõ¶ÌÊÓƵ. For further information please see Dr Liow's .

Phone
+61 2 5114 5174
  • Book Chapters | 2024
    Liow JL; Khennane A; Gigar FZ; Katoozi E, 2024, 'Recycled Wood-Geopolymer Concrete Blocks as Sustainable Material', in , pp. 1585 - 1595,
    Book Chapters | 2023
    Gigar FZ; Khennane A; Liow JL; Tekle BH, 2023, 'Effect of Wood/Binder Ratio, Slag/Binder Ratio, and Alkaline Dosage on the Compressive Strength of Wood-Geopolymer Composites', in , pp. 658 - 667,
    Book Chapters | 2023
    Pignatta G, 2023, 'Leachability of spent chromated copper arsenate (CCA) treated wood encapsulated in geopolymer cement', in , Springer, pp. 657 - 666,
    Book Chapters | 2022
    Liow JL; Khennane A; Muley M; Sorial H; Katoozi E, 2022, 'Recycling of Chrome-Copper-Arsenic Timber Through Cement Particleboard Manufacture', in Sustainable Production, Life Cycle Engineering and Management, pp. 111 - 122,
    Book Chapters | 2013
    Liow J-L, 2013, 'Environmental Impact in Micro-Device Manufacturing', in Davim JP (ed.), Sustainable Manufacturing, Wiley, NY, pp. 1 - 32,
    Book Chapters | 2002
    Liow J-L, 2002, 'Splash Formation by Water Drops', in CISM International Centre for Mechanical Sciences, Springer Vienna, pp. 299 - 302,
  • Journal articles | 2024
    Gigar FZ; Khennane A; Liow JL; Al-Deen S; Tekle BH; Fitzgerald CJ; Basaglia A; Webster CL, 2024, 'Advancing Sustainable Construction Materials: Wood, Rubber, and Cenospheres Geopolymer Masonry Units Development', Sustainability (Switzerland), 16,
    Journal articles | 2024
    Gigar FZ; Khennane A; Liow JL; Tekle BH; Li Z, 2024, 'Characterisation of a novel sustainable wood-geopolymer masonry units', Developments in the Built Environment, 20,
    Journal articles | 2024
    Sabourishirazi A; Liow JL; Ghodrat M, 2024, 'A thorough investigation of geometric and thermohydraulic features in pillow-plate heat exchangers', Applied Thermal Engineering, 254,
    Journal articles | 2023
    Gigar FZ; Khennane A; Liow JL; Tekle BH; Katoozi E, 2023, 'Recycling timber waste into geopolymer cement bonded wood composites', Construction and Building Materials, 400,
    Journal articles | 2023
    Sabourishirazi A; Ghodrat M; Liow JL; Behnia M, 2023, 'Recent advances in design and performance optimization of pillow-plate heat exchangers: a critical review', Journal of Thermal Analysis and Calorimetry, 148, pp. 13679 - 13707,
    Journal articles | 2023
    Wang C; Kayali O; Liow JL; Troitzsch U, 2023, 'Participation and disturbance of superplasticisers in early-stage reaction of class F fly ash-based geopolymer', Construction and Building Materials, 403,
    Journal articles | 2021
    Wang C; Kayali O; Liow JL, 2021, 'The effectiveness and mechanisms of superplasticisers in dispersing class F fly ash pastes', Powder Technology, 392, pp. 81 - 92,
    Journal articles | 2020
    Gao R; Sharipov F; Liow JL; O'Byrne S, 2020, 'Experimental investigation of the separation of binary gaseous mixtures flowing through a capillary tube', Physics of Fluids, 32, pp. 112008,
    Journal articles | 2019
    Ong EES; Liow JL; Ong E, 2019, 'The temperature-dependent structure, hydrogen bonding and other related dynamic properties of the standard TIP3P and CHARMM-modified TIP3P water models', Fluid Phase Equilibria, 481, pp. 55 - 65,
    Journal articles | 2019
    Ong EES; O’Byrne S; Liow JL; Ong E; O'Byrne S, 2019, 'Yield stress measurement of a thixotropic colloid', Rheologica Acta, 58, pp. 383 - 401,
    Journal articles | 2018
    Gao R; O'Byrne S; Liow JL; Boyson TK, 2018, 'An experimental study of pressure distribution nonlinearity in a circular micro-tube', Experimental Thermal and Fluid Science, 97, pp. 468 - 483,
    Journal articles | 2018
    Liow JL; Oakman OA, 2018, 'Performance of mini-axial hydrocyclones', Minerals Engineering, 122, pp. 67 - 78,
    Journal articles | 2017
    Gao R; O Byrne S; Sheehe SL; Kurtz J; Liow JL; O'Byrne S, 2017, 'Transient gas viscosity measurement using tunable diode laser absorption spectroscopy', Experiments in Fluids, 58, pp. 156,
    Journal articles | 2017
    Khaleque A; Mironov EG; Osório JH; Li Z; Cordeiro CMB; Liu L; Franco MAR; Liow JL; Hattori HT, 2017, 'Integration of bow-tie plasmonic nanoantennas on tapered fibers', Optics Express, 25, pp. 8986 - 8996,
    Journal articles | 2016
    Huang Y; Chen J; Wong T; Liow JL, 2016, 'Experimental and theoretical investigations of non-Newtonian electro-osmotic driven flow in rectangular microchannels', Soft Matter, 12, pp. 6206 - 6213,
    Journal articles | 2015
    Zhu G; Liow JL; Neely A, 2015, 'Response to comment on "Experimental study of particle separation and the fish hook effect in a mini-hydrocyclone" [Chem. Eng. Sci. 111 (2014) 94-105]', Chemical Engineering Science, 122, pp. 104 - 105,
    Journal articles | 2014
    Yeow YL; Liow JL; Leong YK, 2014, 'Obtaining model-independent growth rates from experimental data of dry thermal oxidation of silicon', AIChE Journal, 60, pp. 1810 - 1820,
    Journal articles | 2014
    Zhu G; Liow J-L; Neely A, 2014, 'Experimental study of particle separation and the fishhook effect in a mini-hydrocyclone', Chemical Engineering Science, 111, pp. 94 - 105,
    Journal articles | 2014
    Zhu G; Liow JL; Neely A, 2014, 'Corrigendum to "Experimental study of particle separation and the Fishhook effect in a mini-hydrocyclone" [Chem. Eng. Sci. 111 (2014) 94-105]', Chemical Engineering Science, 118, pp. 280,
    Journal articles | 2013
    Mondal S; Leong YK; Liow J; Wickramasinghe SR, 2013, 'Flocculation of yeast suspensions by a cationic flocculant', Powder Technology, 235, pp. 426 - 430,
    Journal articles | 2013
    Yeow YL; Guan ; Wu ; Yap ; Liow J; Leong YK, 2013, 'Obtaining the Kinetic Function of Depolymerization from Evolving Molecular Weight Distribution Data–An Inverse Problem', AIChE Journal, 59, pp. 912 - 922,
    Journal articles | 2012
    Burrows A; Liow J; Brady K, 2012, 'Residence time study of a two-phase mixture in a horizontal cylindrical vessel', Chemical Engineering Research and Design : Official Journal of the European Federation of Chemical Engineering: Part A, 90, pp. 2155 - 2163,
    Journal articles | 2012
    Gu Z; Liow JL; Zhu G, 2012, 'Investigation on the droplet formation time with Xanthan Gum solutions at a T-junction', American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM, 2, pp. 299 - 307,
    Journal articles | 2012
    Jing X; Li H; Wang J; Liow J, 2012, 'An experimental study of cutting forces in micro end-milling', Advanced Materials Research, 500, pp. 357 - 362,
    Journal articles | 2012
    Liow J; Burrows AS; Brady K, 2012, 'Residence time study of a two-phase mixture in a horizontal cylindrical vessel', Chemical Engineering Research and Design, 90, pp. 2155 - 2163,
    Journal articles | 2012
    Rahman SMM; Liow JL, 2012, 'Development of a trajectory-based 3D surface roughness model for the micro end-milling process', Advances in Applied Mechanics Research, Conference Proceedings - 7th Australasian Congress on Applied Mechanics, ACAM 2012, pp. 419 - 424
    Journal articles | 2012
    Yeow YL; Liow J; Leong YK, 2012, 'A General Procedure for Obtaining the Evolving Particle Size Distribution of Flocculating Suspensions', AIChE Journal, 58, pp. 3043 - 3053,
    Journal articles | 2012
    Zhu G; Liow J; Neely AJ, 2012, 'Computational study of the flow characteristics and separation efficiency in a mini-hydrocyclone', Chemical Engineering Research and Design : Official Journal of the European Federation of Chemical Engineering: Part A, 90, pp. 2135 - 2147,
    Journal articles | 2010
    Liow J; Frye U, 2010, 'Surfaces Machined by Micro End-Mills at Constant Chip Load', Key Engineering Materials, 443, pp. 232 - 237,
    Journal articles | 2010
    Liow J, 2010, 'Modelling and Simulation of Cutting Forces in Micromachining', Key Engineering Materials, 443, pp. 652 - 656,
    Journal articles | 2010
    Wickramasinghe SR; Leong YK; Mondal S; Liow J, 2010, 'Influence of cationic flocculant properties on the flocculation of yeast suspensions', Advanced Powder Technology, 21, pp. 374 - 379,
    Journal articles | 2009
    Jegatheesan V; Liow J; Shu L; Kim SH; Visvanathan C, 2009, 'The need for global coordination in sustainable development', Journal of Cleaner Production, 17, pp. 1 - 7,
    Journal articles | 2009
    Jegatheesan V; Shu L; Liow JL; Sivakugan N, 2009, 'Editorial: Diverse challenges faced in developing sustainable catchments', Water, Air, and Soil Pollution: Focus, 9, pp. 321 - 322,
    Journal articles | 2009
    Liow J, 2009, 'Mechanical micromachining: a sustainable micro-device manufacturing approach?', Journal of Cleaner Production, 17, pp. 1 - 6,
    Journal articles | 2008
    Liow J, 2008, 'Peer assessment in Thesis oral presentations', European Journal of Engineering Education, 33, pp. 525 - 537
    Journal articles | 2006
    Campbell GR; Leong YK; Berndt CC; Liow J, 2006, 'Ammonium phosphate slurry rheology and particle properties—The influence of Fe(III) and Al(III) impurities, solid concentration and degree of neutralization', Chemical Engineering Science, 61, pp. 5856 - 5866,
    Journal articles | 2006
    Liovic P; Liovic P; Liow J; Lakehal D; Kothe D, 2006, 'A 3D unsplit advection volume tracking with planarity-preserving interface reconstruction', Computers and Fluids, 35, pp. 1011 - 1032
    Journal articles | 2003
    Liow J; Juusela M; Gray NB; Sutalo ID, 2003, 'Entrainment of a two-layer liquid through a tap-hole', Metallurgical and Materials Transactions B - Process Metallurgy and Materials Processing Science, 34B, pp. 821 - 832
    Journal articles | 2002
    Liow J; Liovic P; Rudman M, 2002, 'Numerical modelling of free surface flows in metallurgical vessels', , 26, pp. 113 - 140
    Journal articles | 2002
    Liow JL, 2002, 'Sloshing of Melts in a Bath Smelting Process Having an Elliptic Cross Section', ISIJ International, 42, pp. 692 - 701
    Journal articles | 2002
    Liow JL, 2002, 'Sloshing of melts in a bath smelting process having an elliptic cross section', ISIJ International, 42, pp. 694 - 701,
    Journal articles | 2001
    Liovic P; Liow J-L; Rudman M, 2001, 'A Volume of Fluid (VOF) Method for the Simulation of Metallurgical Flows', ISIJ International, 41, pp. 225 - 233,
    Journal articles | 2001
    Liow J, 2001, 'Splash formation by spherical drops', Journal of Fluid Mechanics, 427, pp. 73 - 106
    Journal articles | 2000
    Liow J-L, 2000, 'Quasi-equilibrium bubble formation during top-submerged gas injection', Chemical Engineering Science, 55, pp. 4515 - 4524,
    Journal articles | 2000
    Morton D; Rudman M; Jong-Leng L, 2000, 'An investigation of the flow regimes resulting from splashing drops', Physics of Fluids, 12, pp. 747 - 763,
    Journal articles | 1999
    Lawson NJ; Rudman M; Guerra A; Liow J-L, 1999, 'Experimental and numerical comparisons of the break-up of a large bubble', Experiments in Fluids, 26, pp. 524 - 534,
    Journal articles | 1998
    LIOW J; TSIRIKIS P; GRAY N, 1998, 'Study of refractory wear in the tuyere region of a peirce-smith nickel convertor', Canadian Metallurgical Quarterly, 37, pp. 99 - 117,
    Journal articles | 1998
    Lawson NJ; Liow J-L, 1998, 'Low-cost design of 35 mm drum camera for high-resolution, high-speed image analysis', Review of Scientific Instruments, 69, pp. 4195 - 4197,
    Journal articles | 1998
    Liow JL; Tsirikis P; Gray NB, 1998, 'Study of refractory wear in the tuyere region of a Peirce-Smith nickel convertor', Canadian Metallurgical Quarterly, 37, pp. 99 - 117,
    Journal articles | 1996
    Jong-Leng L; Gray NB, 1996, 'Experimental study of splash generation in a flash smelting furnace', Metallurgical and Materials Transactions B, 27, pp. 633 - 646,
    Journal articles | 1995
    Liow J-L; Dickinson WHR; Allan MJ; Gray NB, 1995, 'Study of slopping and splashing in a cylindrical bath with top-submerged injection', Metallurgical and Materials Transactions B, 26, pp. 887 - 889,
    Journal articles | 1991
    Liow J; Kenney CN, 1991, 'The simple cycle of the pressure swing adsoprtion process', Chemical Engineering Research and Design, 69A, pp. 215 - 220
    Journal articles | 1990
    Liow J-L; Gray NB, 1990, 'Slopping resulting from gas injection in a peirce-smith converter: Water modeling', Metallurgical Transactions B, 21, pp. 987 - 996,
    Journal articles | 1990
    Liow J-L; Gray NB, 1990, 'Slopping resulting from gas injection in a peircesmith converter: The period of the standing wave', Metallurgical Transactions B, 21, pp. 657 - 664,
    Journal articles | 1990
    Liow J-L; Kenney CN, 1990, 'The backfill cycle of the pressure swing adsorption process', AIChE Journal, 36, pp. 53 - 65,
    Journal articles | 1988
    Liow J-L; Gray NB, 1988, 'A model of bubble growth in wetting and non-wetting liquids', Chemical Engineering Science, 43, pp. 3129 - 3139,
    Journal articles | 1982
    Radcliffe DF; Thomas G; Liow JL, 1982, 'Direct measurement of external mass transfer in packed sorbent beds', AIChE Journal, 28, pp. 344 - 346,
  • Preprints | 2023
    Khennane A; Gigar FZ; Liow J-L; Tekle BH; Katoozi E, 2023, Recycling Timber Waste into Geopolymer Cement Bonded Wood Composites, ,
    Conference Papers | 2023
    Sabouri Shirazi AH; Ghodrat M; Liow J-L, 2023, 'A Novel Method in Predicting Heat Transfer Coefficient and Pressure Drop in Pillow-Plate Heat Exchangers', in Twentieth International Conference on Flow Dynamics (ICFD2023), Institute of Fluid Science, Tohoku University, Sendai, Miyagi, Japan, presented at Twentieth International Conference on Flow Dynamics (ICFD2023), Sendai, Miyagi, Japan, 06 November 2023 - 08 November 2023,
    Conference Papers | 2023
    Sabouri Shirazi AH; Ghodrat M; Liow J-L, 2023, 'An Artificial Neural Network Model for Predicting Hydraulic Diameters in Pillow-Plate Heat Exchangers', in Tokumasu T; Ahn J (ed.), Twentieth International Conference on Flow Dynamics (ICFD2023), Institute of Fluid Science, Tohoku University, Sendai, Miyagi, Japan, presented at Twentieth International Conference on Flow Dynamics (ICFD2023), Sendai, Miyagi, Japan, 06 November 2023 - 08 November 2023,
    Conference Abstracts | 2022
    Mohanty S; Liow J, 2022, 'A Computational comparison of mini-axial and reverse flow hydrocyclone', in European Mechanics Society, Megaron Athens International Conference Centre, Athens, Greece, presented at European Fluid Mechanics Conference, Megaron Athens International Conference Centre, Athens, Greece, 13 September 2022 - 16 September 2022,
    Conference Posters | 2022
    Mohanty S; Liow J, 2022, 'Evaluation of mini axial & reverse flow hydrocyclone flow field and separation mechanism', University of Melbourne, Australia, presented at Australasian Fluid Mechanics Society Student/ECR Retreat 2022, University of Melbourne, Australia, 18 July 2022 - 19 July 2022,
    Conference Papers | 2022
    Mohanty S; Liow J, 2022, 'Investigation of a 75mm axial flow hydrocyclone for industrial use: an alternative to the reverse flow hydrocyclone', in Proceedings of the 23rd Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, University of Sydney, Australia, presented at The 23rd Australasian Fluid Mechanics Conference (AFMC2022), University of Sydney, Australia, 04 December 2022 - 08 December 2022,
    Conference Presentations | 2022
    Mohanty S; Liow JL, 2022, 'Parametric study of mini-axial flow hydrocyclone through numerical simulation', presented at in 7th Minerals Engineering International (MEI) Conference_Physical Separation’22, Falmouth, Cornwall, UK (Online), 09 May 2022 - 11 May 2022,
    Conference Papers | 2022
    Pignatta G, 2022, 'Leachability of spent chromated copper arsenate (CCA) treated wood encapsulated in geopolymer cement', in Mediterranean Architecture and the Green-Digital Transition: Selected Papers from the World Renewable Energy Congress Med Green Forum 2022, Springer, Florence, Italy, pp. 657 - 666, presented at Med Green Forum 2022, Florence, Italy, 20 July 2022 - 22 July 2022,
    Conference Papers | 2020
    Mohanty S; Liow JL, 2020, 'CFD analysis to estimate the best validation approach for reverse flow hydrocyclone', in 22nd Australasian Fluid Mechanics Conference, AFMC 2020, University of Queensland Library, presented at Proceedings of the 22nd Australasian Fluid Mechanics Conference AFMC2020,
    Conference Papers | 2019
    Wang C; Kayali O; Liow JL, 2019, 'Effect of electrostatic repulsion induced by superplasticizers on the flow behaviour of fly ash pastes', in Sustainable Construction Materials and Technologies, Coventry University, Lanchester Library, Kingston University London, UK, pp. 164 - 176, presented at Fifth International Conference on Sustainable Construction Materials & Technologies (SCMT5), Kingston University London, UK, 14 July 2019 - 17 July 2019,
    Conference Papers | 2018
    Liow J-L, 2018, 'A Low Cost Extensional Viscometer for Small Relaxation Times', in Lau TCW; Kelso R (ed.), Proceedings of the 21st Australasian Fluid Mechanics Conference, The University of Adelaide, Adelaide, presented at 21st Australasian Fluid Mechanics Conference, Adelaide, 10 December 2018 - 13 December 2018,
    Conference Papers | 2018
    Liow JL, 2018, 'A low cost extensional viscometer for small relaxation times', in Proceedings of the 21st Australasian Fluid Mechanics Conference, AFMC 2018,
    Conference Papers | 2018
    Ong EES; O'Byrne S; Liow JL; Ong E, 2018, 'Molecular dynamics study on the structural and dynamic properties of xanthan gum in a dilute solution under the effect of temperature', in Ha DT; Vyas A; BoitelConti M; Ludwig M; Ruml T; Wang FM; Truong DH; Dao TT (eds.), AIP Conference Proceedings, AIP Publishing, VIETNAM, Ton Duc Thang Univ, Ho Chi Minh City, pp. 030008, presented at 2nd International Conference on Applied Sciences (ICAS), VIETNAM, Ton Duc Thang Univ, Ho Chi Minh City, 24 May 2018 - 25 May 2018,
    Conference Papers | 2016
    Oakman OA; Liow J-L, 2016, 'Simulation and experimental validation of an axial-flow hydrocyclone', in Ivey G; Tongming Z; Jones N; Draper S (eds.), Proceedings of the 20th Australasian fluid mechanics conference, University of WEstern Australia, Perth, presented at 20th Australasian Fluid Mechanics Conference, Perth, 05 December 2016 - 08 December 2016,
    Conference Papers | 2016
    Oakman OA; Liow JL, 2016, 'Simulation and experimental validation of an axial-flow hydrocyclone', in Proceedings of the 20th Australasian Fluid Mechanics Conference, AFMC 2016
    Conference Papers | 2016
    Oakman OA; Liow JL, 2016, 'Simulation and experimental validation of an axial-flow hydrocyclone', in Proceedings of the 20th Australasian Fluid Mechanics Conference, AFMC 2016
    Conference Papers | 2014
    Liow J; Liow JL, 2014, 'Drop Formation At A T-Junction With Dilute Xanthan Gum Solutions As The Dispersed Phase', in Chowdhury H; Alam F (ed.), Proceedings of the 19th Australasian Fluid Mechanics Conference, RMIT University, Melbourne, presented at 19th Australasian Fluid Mechanics Conference, Melbourne, 08 December 2014 - 11 December 2014
    Conference Papers | 2013
    Yeow LY; Liow JL; Leong YK, 2013, 'A general procedure for solving the population balance equation in flocculating suspensions', in Particle Technology Forum 2013 - Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future, pp. 97 - 99
    Conference Papers | 2013
    Zhu G; Liow JL, 2013, 'Experimental and computational study of the causes of the fishhook effect in a mini-hydrocyclone', in Separations Division 2013 - Core Programming Area at the 2013 AIChE Annual Meeting: Global Challenges for Engineering a Sustainable Future, pp. 178 - 181
    Conference Papers | 2012
    Andrew K; Britton P; Liow J, 2012, 'Dip and drift in spin bowling', in Proceedings of the Eighteenth Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, Launceston, TAS, pp. 1 - 4, presented at 18th Australasian Fluid Mechanics Conference, Launceston, Tasmania, 03 December 2012 - 07 December 2012
    Conference Papers | 2012
    Gu Z; Liow J; Zhu G, 2012, 'Investigation on the droplet formation time with xanthan gum solutions at a T-junction', in Proceedings of the ASME 2012 Fluids Engineering Division Summer Meeting FEDSM2012, ASME, New York, pp. 1 - 9, presented at ASME 2012 Fluids Engineering Division Summer Meeting, Puerto Rico, 08 July 2012 - 12 July 2012
    Conference Papers | 2012
    Gu Z; Liow J, 2012, 'A force balance model for the size prediction of droplets formed at T-junction with xanthan gum solutions', in Proceedings of the Eighteenth Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, Launceston, TAS, pp. 1 - 4, presented at 18th Australasian Fluid Mechanics Conference, Launceston, Tasmania, 03 December 2012 - 07 December 2012
    Conference Posters | 2012
    Gu Z; Liow J, 2012, 'Investigation on the droplet formation time with xanthan gum solutions at a T-junction', Dalian, China, pp. 1 - 3, presented at 3rd International Conference on Advances in Microfluidics and Nanofluidics (AMN 2012), Dalian, China, 23 May 2012 - 26 May 2012
    Conference Papers | 2012
    Gu Z; Liow J, 2012, 'Micro-droplet formation with non-Newtonian solutions in microfluidic T-junctions with different inlet angles', in IEEE-NEMS 2012 Proceedings, Kyoto, Japan, pp. 548 - 553, presented at IEEE-NEMS 2012, Kyoto, Japan, 05 March 2012 - 08 March 2012
    Conference Posters | 2012
    Gu Z; Liow J, 2012, 'Microdroplet Formation in a T-junction with Xanthan Gum Solutions', Dalian, China, pp. 1 - 3, presented at 3rd International Conference on Advances in Microfluidics and Nanofluidics (AMN 2012), Dalian, China, 23 May 2012 - 26 May 2012
    Conference Papers | 2012
    Gu Z; Liow JL, 2012, 'Micro-droplet formation with non-Newtonian solutions in microfluidic T-junctions with different inlet angles', in 2012 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems, NEMS 2012, pp. 423 - 428,
    Conference Papers | 2012
    Zhu G; Liow J; Neely AJ, 2012, 'Experimental study of the causes of the fishhook effect in a mini-Hydrocyclone', in Proceedings of the Eighteenth Australasian Fluid Mechanics Conference, Australasian Fluid Mechanics Society, Launceston, TAS, pp. 1 - 4, presented at 18th Australasian Fluid Mechanics Conference, Launceston, Tasmania, 03 December 2012 - 07 December 2012
    Conference Papers | 2012
    Zhu G; Liow J; Neely AJ, 2012, 'Study of the transitional flow and particle separation with a fishhook effect in a mini-hydrocyclone', in Proceedings of the ASME 2012 Fluids Engineering Division Summer Meeting FEDSM2012, ASME, New York, pp. 1 - 10, presented at ASME 2012 Fluids Engineering Division Summer Meeting, Puerto Rico, 08 July 2012 - 12 July 2012
    Conference Papers | 2012
    Zhu G; Liow JL; Neely A, 2012, 'Study of the transitional flow and particle separation with a fishhook effect in a mini-hydrocyclone', in American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM, pp. 289 - 298,
    Conference Papers | 2011
    Gu Z; Liow J, 2011, 'MICRODROPLET FORMATION IN A T-JUNCTION WITH XANTHAN GUM SOLUTIONS', in Chemeca 2011, Engineers Australia, Sydney, pp. 1 - 10, presented at Chemeca 2011, Sydney, 18 September 2011 - 21 September 2011
    Conference Papers | 2011
    Zhu G; Liow J; Neely AJ, 2011, 'COMPUTATIONAL STUDY OF CENTRIFUGAL INSTABILITIES IN A MICRO-SIZED HYDROCYCLONE', in Chemeca 2011, Engineers Australia, Sydney, pp. 1 - 11, presented at Chemeca, Sydney, 18 September 2011 - 21 September 2011
    Conference Papers | 2010
    Burrows A; Liow J; Brady K, 2010, 'Cold Modelling of Two Phase Separation in a Rotary Holding Furnace', in 17th Australasian Fluid Mechanics conference, The University of Auckland, Auckland, NZ, pp. 812 - 815, presented at 17th Australasian Fluid Mechanics Conference 2010, 17AFMC, Auckland, New Zealand, 05 December 2010 - 09 December 2010
    Conference Papers | 2010
    Zhu G; Liow J; Neely AJ, 2010, 'Computational Study of Flow in a Micro-Sized Hydrocyclone', in 17th Australasian Fluid Mechanics conference, The University of Auckland, Auckland, NZ, pp. 51 - 54, presented at 17th Australasian Fluid Mechanics Conference 2010, 17AFMC, Auckland, New Zealand, 05 December 2010 - 09 December 2010,
    Conference Papers | 2009
    Wickramasinghe SR; Leong YK; Liow J, 2009, 'Influence of cationic flocculant properties on the flocculation of yeast suspensions', in Chemeca 2009, Engineers Australia, Australia, presented at Engineering our Future: Are we up to the Challenge?, Perth, WA, 27 September 2009 - 30 September 2009
    Conference Papers | 2008
    Liow J; Cole DE, 2008, 'High framing rate PIV studies of an impinging water drop', in Proceedings of SPIE vol 7126: 28th International Congress on High-Speed Imaging and Photonics, Society of Photo-Optical Instrumentation Engineers, Bellingham, WA, USA, presented at ICHSIP28, 28th International Congress on High-Speed Imaging and Photonics, Canberra, Australia, 09 November 2008,
    Conference Papers | 2008
    Liow J; Cole DE, 2008, 'Surface Profiles of Collapsing Cavities of Splash Drops', in Denier J; Finn M; Mattner T (eds.), CD-ROM, Adelaide, Sth Aust, presented at XXIInd Intl. Congr. Theor. & Appl. Mech. (ICTAM2008), Adelaide, Sth Aust, 25 August 2008 - 29 August 2008
    Conference Papers | 2007
    Liow J; Cole DE, 2007, 'Bubble entrapment mechanisms during the impact of water drop', in 16th Australasian Fluid Mechanics Conference, Gold Coast, Qld, presented at 16th Australasian Fluid Mechanics Conference, Gold Coast, Qld, 03 December 2007 - 07 December 2007
    Conference Papers | 2007
    Liow J; Frazer A; He Y; Eastwood K; Phan C, 2007, 'Control of acid mist formation in the electrowinning of copper', in Chemeca 2007: Academics and Industry Strengthening the Profession, Melbourne, Australia, presented at Chemeca 2007: Academics and Industry Strengthening the Profession, Melbourne, Australia, 23 September 2007 - 26 September 2007
    Conference Papers | 2005
    Cole DE; Liow J, 2005, 'Entrapment and rupture of large air pockets in liquid-liquid impacts', in 33rd Australasian Chemical Engineering Conference (CHEMECA 2005): Smart Solutions-Doing More With Less, Curran Associates, Inc., New York, presented at Chemeca 2005: Smart Solutions - "Doing More With Less", Brisbane, Qld, 25 September 2005 - 28 September 2005
    Conference Papers | 2005
    Cole DE; Liow J, 2005, 'High-framing rate PIV for vortex ring visualisation', in Proceedings of the 4th Australian Conference on Laser Diagnostics in Fluid Mechanics and Combustion, University of Adelaide, School of Mechanical Engineering, Adelaide, presented at 4th Australian Conference on Laser Diagnostics in Fluid Mechanics and Combustion, McLaren Vale, 07 December 2005 - 09 December 2005
    Conference Papers | 2005
    Cole DE; Liow J, 2005, 'Modelling the mixing in an elliptic top submerged gas injected vessel', in 33rd Australasian Chemical Engineering Conference (CHEMECA 2005): Smart Solutions-Doing More With Less, Curran Associates, Inc., New York, presented at Chemeca 2005: Smart Solutions - "Doing More With Less", Brisbane, Qld, 25 September 2005 - 28 September 2005
    Conference Papers | 2004
    Cole DE; Liow J, 2004, 'Bubble entrapment during water drop impacts', in Proceedings of the Fifteenth Australasian Fluid Mechanics Conference, The University of Sydney, Sydney, presented at Australasian Fluid Mechanics Conference 2004, Sydney, 13 December 2004 - 17 December 2004
    Conference Papers | 2004
    Liow J; Cole DE, 2004, 'Drop formation in T-junction microchannels', in 32nd Australasian Chemical Engineering Conference, Sydney, presented at 32nd Australasian Chemical Engineering Conference, Sydney, 26 September 2004 - 29 September 2004
    Conference Papers | 2004
    Liow J, 2004, 'Numerical simulation of drop formation in a T-shaped microchannel', in Proceedings of the Fifteenth Australasian Fluid Mechanics Conference, The University of Sydney, Sydney, presented at Australasian Fluid Mechanics Conference 2004, Sydney, 13 December 2004 - 17 December 2004
    Conference Papers | 2004
    Pennisi S; Liow J; Schneider P, 2004, 'CFD model development for a final effect evaporator', in Proceedings of the Association of Sugar Cane Technologists, Brisbane, Australia, presented at Association of Sugar Cane Technologists, Brisbane, Australia, 01 May 2004 - 05 May 2004
    Conference Papers | 2003
    Liovic P; Lakehal D; Liow J, 2003, 'LES of turbulent bubble formation and break-up using interface tracking-based simulation', in Direct and Large-Eddy Simulation V, Springer, Munich university of Technology, presented at 5th international ERCOFTAC workshop on direct and large-eddy simulation, Munich university of Technology, 27 August 2003 - 29 August 2003
    Conference Papers | 2003
    Liow J, 2003, 'LES of turbulent bubble formation and break-up based on interface tracking', in Direct and Large-Eddy Simulation V, Springer, Munich university of Technology, presented at 5th international ERCOFTAC workshop on direct and large-eddy simulation, Munich university of Technology, 27 August 2003 - 29 August 2003
    Conference Papers | 2003
    Pennisi S; Liow J; Schneider P, 2003, 'CFD modelling of a sugar evaporator', in Proceedings of the third International Conference on Computational Fluid Dynamics in the Minerals and Process Industries, Melbourne, presented at 3rd International Conference on CFD in the Mineral and Processing Industry, Melbourne, 10 December 2003 - 12 December 2003
    Conference Papers | 1999
    Liow JL; Assaad GE; Liovic P; Gray NB; Rudman MR, 1999, 'Modelling of slag-skimming in a Peirce-Smith converter', in 4th International Conference COPPER 99-COBRE 99, pp. 417 - 431
    Conference Papers | 1998
    Assaad GE; Liow JL; Gray NB, 1998, 'Slag-metal flow over a weir', in Proceedings of the 1998 Thirteenth Australasian Fluid Mechanics Conference, Melbourne, Australia, 13-18 December 1998, pp. 445 - 448
    Conference Papers | 1998
    Liovic P; Rudman M; Assaad G; Liow JL, 1998, 'Entrainment phenomena associated with multi-liquid flow over a weir', in Proceedings of the 1998 Thirteenth Australasian Fluid Mechanics Conference, Melbourne, Australia, 13-18 December 1998 (Volume 2), pp. 925 - 928
    Conference Papers | 1997
    Morton DE; Rudman MJ; Liow JL, 1997, 'Finite difference method for modelling impacting drops', in American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED
    Conference Papers | 1996
    Jong-Leng L; Guerra AE; Gray NB, 1996, 'Interactions of large gas bubbles with fluid interfaces', in TMS Annual Meeting, pp. 175 - 188
    Conference Papers | 1996
    Liow JL; Lawson N; Laird G; Gray NB, 1996, 'Experimental methods in gas injection into liquid systems', in The Howard Worner International Symposium on Injection in Pyrometallurgy, pp. 221 - 236
    Conference Papers | 1996
    Liow JL; Morton DE; Guerra AE; Gray NB, 1996, 'Dynamics of splash formation in gas injected systems', in The Howard Worner International Symposium on Injection in Pyrometallurgy, pp. 175 - 185
    Conference Papers | 1993
    Jong-Leng L; Gray NB, 1993, 'Effect of splash generation on the performance of gas injected processes', in First International Conference on Processing Materials for Properties, pp. 341 - 344
    Preprints |
    Katoozi E; Liow J-L; Khennane A, Direct Colorimetric Measurement of Copper with Sodium Diethyldithiocarbamate as the Reagent in the Presence of Ferric Ions, ,