Ƶ

Dr Mohammad Islam

Dr Mohammad Islam

Adjunct Senior Lecturer
Engineering
Mechanical and Manufacturing Engineering

Dr Mohammad S Islam completed his PhD in Materials and Process Engineering from the University of Waikato, New Zealand. He held Research Fellow positions at the University of Sydney inAustralia, at the University of Minho inPortugal, at CSIRO Materials Science and Engineering inAustralia and Materials Scientist position in Pultron Composites, New Zealand. Dr Islam is an Associate Editor of Journal of Modern Polymer Chemistry and Materials.He is also editorial board member of threejournals: Composite Materials ofScience Publishing Group,Engineering: Current Trends and Advanced Materials Science and Engineering. He has also joined the Editorial Board of "Coatings" as a Topic Editor.

His research focuses on toughening of composite materials for cryogenic fuel tank applications, development of FRP prepreg materials, development of properties of composites manufactured using automated fibre placement method, development of fire-retardant materials and their applications, synthesis of nano-materials and their multifunctional applications, designing and developing materials testing methods, fracture mechanics of materials and developing coating and lining materials for oil and gas infrastructures.

Location
Level 3, Building J17, Library Road Kensington, NSW 2052
  • Books | 2011
    Islam MS; Pickering KL, 2011, Properties and Ageing of Biocomposites: Effect of Natural Fibre Treatments & Processing and Variation in Composites Manufacturing Processes & Conditions, Lap Lambert Academic Publishing GmbH & Co. KG, Germany
  • Book Chapters | 2022
    Salahuddin B; Aziz S; Hossain MM; Ahmed A; Rahim MA; Islam M; Faisal SN, 2022, 'Graphene Reinforced Polymer composites', in Bandyopadhyay S; Gujjala R (ed.), Toughened Composites Micro and Macro Systems, CRC Press,
    Book Chapters | 2022
    Salahuddin B; Sha Z; Aziz S; Faisal SN; Islam M, 2022, 'Durability Against Fatigue and Moisture of Natural Fibre Composite', in Khan A; Manikandan A; Ramesh M; Khan I; Asiri AMA (ed.), Sustainable Natural Fibre Composites, Materials Research Forum, pp. 128 - 153,
    Book Chapters | 2021
    Faisal S; Shabnam L; Aziz S; Dalal MH; Islam MM; Hassan M; Islam M, 2021, '3D Graphene-based Materials for Enhancing the Energy Density of Sodium Ion Batteries', in Graphene-based 3D Macrostructures for Clean Energy and Environmental Applications, Royal Society of Chemistry,
    Book Chapters | 2020
    Islam MS, 2020, 'Polyvinylalcohol and Polyvinyl acetate', in Mamun AA; Chen JY (ed.), Industrial Applications of Biopolymers and their Environmental Impact, edn. 1, CRC Press T&F
    Book Chapters | 2016
    Islam MS; Roy AK, 2016, 'Surface preparation of fibres for composite applications', in Fibrous and textile materials for composite applications, Springer, Singapore, pp. 301 - 315,
    Book Chapters | 2011
    Islam MS, 2011, 'Synthesis of Polylactic Acid for Biomedical, Food Packaging and Structural Applications: A Review', in Polylactic Acid: Synthesis, Properties and Applications, Nova Science Publishers, Inc., New York, pp. 219 - 233,
  • Journal articles | 2024
    Laban O; Pearce G; Zhang J; Islam MS; Djukic LP, 2024, 'A comparative study of the cryogenic performance of CFRP composites with polyethersulfone/epoxy blends and electrospun polyethersulfone interleaves', Composites Part A: Applied Science and Manufacturing, 178,
    Journal articles | 2024
    Malik K; Ahmad F; Dawood MS; Islam MS; Ali S; Raza A; Shahed CA, 2024, 'Mechanical property enhancement of graphene-kenaf-epoxy multiphase composites for automotive applications', Composites Part A: Applied Science and Manufacturing, 177,
    Journal articles | 2024
    Sha Z; Yang W; Wang C; Islam MS; Heng Yeoh G; Officer DL; Canning W; Zhang J; Wang CH, 2024, 'Enhancing oxidation resistance of carbon fibre reinforced phenolic composites by ZrO2 nanoparticles through out-of-autoclave vacuum infusion', Composites Part A: Applied Science and Manufacturing, 180,
    Journal articles | 2024
    Wang J; Chang W; Islam MS; Huang F; Wu S; Rose LRF; Zhang J; Wang CH, 2024, 'Toughening epoxy by nano-structured block copolymer to mitigate matrix microcracking of carbon fibre composites at cryogenic temperatures', Composites Science and Technology, 251,
    Journal articles | 2023
    Hasan SMM; Sturm-Ramirez K; Kamal AHM; Islam MA; Rahman M; Kile JC; Kennedy ED; Gurley ES; Islam MS, 2023, 'Quail Rearing Practices and Potential for Avian Influenza Virus Transmission, Bangladesh', EcoHealth, 20, pp. 167 - 177,
    Journal articles | 2023
    Islam M; Chang W; Sha Z; Wang J; Wu S; Rose LRF; Kinloch A; Wang C, 2023, 'Mitigating cryogenic microcracking in carbon-fibre reinforced polymer composites using negative thermal-expansion nanoparticles functionalized by a polydopamine coating', Composites Part B Engineering,
    Journal articles | 2023
    Sha Z; Cheng X; Charles ADM; Zhou Y; Islam MS; Rider AN; Peng S; Lim M; Timchenko V; Wang CH, 2023, 'In-situ aligning magnetic nanoparticles in thermoplastic adhesives for contactless rapid joining of composite structures', Composite Structures, 321,
    Journal articles | 2023
    Sha Z; Cheng X; Islam MS; Sangkarat P; Chang W; Brown SA; Wu S; Zhang J; Han Z; Peng S; Wang CH, 2023, 'Synergistically enhancing the electrical conductivity of carbon fibre reinforced polymers by vertical graphene and silver nanowires', Composites Part A: Applied Science and Manufacturing, 168,
    Journal articles | 2023
    Yu Y; Peng S; Islam M; Wu S; Wang CH, 2023, 'Wearable Supercapacitive Temperature Sensors with High Accuracy Based on Ionically Conductive Organogel and Macro-Kirigami Electrode', Advanced Materials Technologies, 8,
    Journal articles | 2022
    Islam M; Menghe M, 2022, 'Manufacture and characterization of hemp-Acrodur biocomposites: Variation of process parameters Fibers and Polymers', Fibers and Polymers, 23, pp. 2261 - 2270,
    Journal articles | 2022
    Wahed SB; Dunstan CR; Boughton PA; Ruys AJ; Faisal SN; Wahed TB; Salahuddin B; Cheng X; Zhou Y; Wang CH; Islam MS; Aziz S, 2022, 'Functional Ultra‐High Molecular Weight Polyethylene Composites for Ligament Reconstructions and Their Targeted Applications in the Restoration of the Anterior Cruciate Ligament', Polymers, 14,
    Journal articles | 2021
    Chang W; Rose LRF; Islam MS; Wu S; Peng S; Huang F; Kinloch AJ; Wang CH, 2021, 'Strengthening and toughening epoxy polymer at cryogenic temperature using cupric oxide nanorods', Composites Science and Technology, 208,
    Journal articles | 2021
    Chen J; Zhou Y; Islam MS; Cheng X; Brown SA; Han Z; Rider AN; Wang CH, 2021, 'Carbon fiber reinforced Zn–MnO2 structural composite batteries', Composites Science and Technology, 209,
    Journal articles | 2021
    Cheng X; Zhou Y; Charles ADM; Yu Y; Islam MS; Peng S; Wang J; Rider AN; Lim M; Timchenko V; Wang CH, 2021, 'Enabling contactless rapid on-demand debonding and rebonding using hysteresis heating of ferrimagnetic nanoparticles', Materials and Design, 210,
    Journal articles | 2021
    Islam M; Faisal SS; Tong L; Roy AK; Zhang J; Haque E; Minett AI; Wang CH, 2021, 'N-doped reduced graphene oxide (rGO) wrapped carbon microfibers as binder-free electrodes for flexible fibre supercapacitors and sodium-ion batteries', Journal of Energy Storage, 37, pp. 102453 - 102453,
    Journal articles | 2021
    Islam MS; Benninger LF; Pearce G; Wang CH, 2021, 'Toughening carbon fibre composites at cryogenic temperatures using low-thermal expansion nanoparticles', Composites Part A: Applied Science and Manufacturing, 150, pp. 106613,
    Journal articles | 2021
    Roy AK; Faisal SN; Spickenheuer A; Scheffler C; Wang J; Harris AT; Minett AI; Islam MS, 2021, 'Loading dependency of 2D MoS2 nanosheets in the capacitance of 3D hybrid microfibre-based energy storage devices', Carbon Trends, 5,
    Journal articles | 2021
    Salahuddin B; Faisal SN; Baigh TA; Alghamdi MN; Islam MS; Song B; Zhang X; Gao S; Aziz S, 2021, 'Carbonaceous materials coated carbon fibre reinforced polymer matrix composites', Polymers, 13,
    Journal articles | 2021
    Zhang J; Liu M; Pearce G; Yu Y; Sha Z; Zhou Y; Yuen ACY; Tao C; Boyer C; Huang F; Islam M; Wang CH, 2021, 'Strain stiffening and positive piezoconductive effect of liquid metal/elastomer soft composites', Composites Science and Technology, 201,
    Journal articles | 2021
    Zhou Y; Cheng X; Tynan B; Sha Z; Huang F; Islam MS; Zhang J; Rider AN; Dai L; Chu D; Wang D; Han Z; Wang CH, 2021, 'High-Performance Hierarchical MnO2/CNT Electrode for Multifunctional Supercapacitors', Carbon,
    Journal articles | 2021
    Zhou Y; Qi H; Yang J; Bo Z; Huang F; Islam MS; Lu X; Dai L; Amal R; Wang CH; Han Z, 2021, 'Two-birds-one-stone: Multifunctional supercapacitors beyond traditional energy storage', Energy and Environmental Science, 14, pp. 1854 - 1896,
    Journal articles | 2020
    Islam MS; Deng Y; Tong L; Faisal SN; Roy AK; Minett AI, 2020, 'High grafting strength from chemically bonded 2D layered material onto carbon microfibres for reinforced composites and ultra-long flexible cable electronic devices', Materials Today Communications, 24, pp. 100994,
    Journal articles | 2020
    Islam MS; Miao M, 2020, 'Nonwoven Hemp Fibre Reinforced Acrodur Biocomposites and their Mechanical Performance in Immersed Water', Research & Development in Material Science, 14,
    Journal articles | 2020
    Zhang F; Hu H; Islam M; Peng S; Wu S; Lim S; Zhou Y; Wang CH, 2020, 'Multi-modal strain and temperature sensor by hybridizing reduced graphene oxide and PEDOT:PSS', Composites Science and Technology, 187,
    Journal articles | 2019
    Sha Z; Han Z; Wu S; Zhang F; Islam MS; Brown SA; Wang CH, 2019, 'Low-temperature plasma assisted growth of vertical graphene for enhancing carbon fibre/epoxy interfacial strength', Composites Science and Technology, 184,
    Journal articles | 2018
    Deng Y; Islam M; Tong L, 2018, 'Effects of grafting strength and density on interfacial shear strength of carbon nanotube grafted carbon fibre reinforced composites', Composites Science and Technology,
    Journal articles | 2018
    Faisal SN; Haque E; Noorbehesht N; Liu H; Islam MM; Shabnam L; Roy AK; Pourazadi E; Islam MS; Harris AT; Minett AI, 2018, 'A quadrafunctional electrocatalyst of nickel/nickel oxide embedded N-graphene for oxygen reduction, oxygen evolution, hydrogen evolution and hydrogen peroxide oxidation reactions', Sustainable Energy and Fuels, 2, pp. 2081 - 2089,
    Journal articles | 2018
    Faisal SN; Subramaniyam CM; Haque E; Islam M; Noorbehesht N; Roy AK; Islam MS; Liu HK; Dou SX; Harris AT; Minett AI, 2018, 'Nanoarchitectured Nitrogen-Doped Graphene/Carbon Nanotube as High Performance Electrodes for Solid State Supercapacitors, Capacitive Deionization, Li-Ion Battery, and Metal-Free Bifunctional Electrocatalysis', ACS Applied Energy Materials,
    Journal articles | 2017
    Islam MS; Deng Y; Tong L; Roy AK; Faisal SN; Hassan M; Minett AI; Gomes VG, 2017, 'In-situ direct grafting of graphene quantum dots onto carbon fibre by low temperature chemical synthesis for high performance flexible fabric supercapacitor', Materials Today Communications, 10, pp. 112 - 119,
    Journal articles | 2017
    Islam MS; Tong L, 2017, 'Effect of hygrothermal conditioning on the energy release rate and failure mechanism of metal only adherend-glass fibre prepreg co-cured single lap joints', Journal of Adhesion Science and Technology, 31, pp. 2219 - 2233,
    Journal articles | 2016
    Islam MS; Deng Y; Tong L; Faisal SN; Roy AK; Minett AI; Gomes VG, 2016, 'Grafting carbon nanotubes directly onto carbon fibers for superior mechanical stability: Towards next generation aerospace composites and energy storage applications', Carbon, 96, pp. 701 - 710,
    Journal articles | 2016
    Islam MS; Tong L, 2016, 'Effects of hygrothermal and ambient humidity conditioning on shear strength of metal-GFRP single lap joints co-cured in and out of water', International Journal of Adhesion and Adhesives, 68, pp. 305 - 316,
    Journal articles | 2016
    Islam MS; Tong L, 2016, 'Influence of pinning on static strength of co-cured metal-GFRP hybrid single lap joints', Composites Part A: Applied Science and Manufacturing, 84, pp. 196 - 208,
    Journal articles | 2015
    Islam MS; Tong L, 2015, 'Effects of initial blister radius and shaft diameter on energy release rate of metal-polymer composite coating', International Journal of Adhesion and Adhesives, 62, pp. 107 - 123,
    Journal articles | 2014
    Islam MS; Miao M, 2014, 'Optimising processing conditions of flax fabric reinforced Acrodur biocomposites', Journal of Composite Materials, 48, pp. 3281 - 3292,
    Journal articles | 2014
    Islam MS; Pickering KL, 2014, 'An empirical equation for predicting mechanical property of chemically treated natural fibre using a statistically designed experiment', Fibers and Polymers, 15, pp. 355 - 363,
    Journal articles | 2014
    Islam MS; Tong L; Falzon PJ, 2014, 'Influence of metal surface preparation on its surface profile, contact angle, surface energy and adhesion with glass fibre prepreg', International Journal of Adhesion and Adhesives, 51, pp. 32 - 41,
    Journal articles | 2011
    Islam MS; Church JS; Miao M, 2011, 'Effect of removing polypropylene fibre surface finishes on mechanical performance of kenaf/polypropylene composites', Composites Part A: Applied Science and Manufacturing, 42, pp. 1687 - 1693,
    Journal articles | 2011
    Islam MS; Pickering KL; Foreman NJ, 2011, 'Influence of alkali fiber treatment and fiber processing on the mechanical properties of hemp/epoxy composites', Journal of Applied Polymer Science, 119, pp. 3696 - 3707,
    Journal articles | 2011
    Islam MS; Pickering KL; Foreman NJ, 2011, 'The effect of accelerated weathering on the mechanical properties of alkali treated hemp fibre/epoxy composites', Journal of Adhesion Science and Technology, 25, pp. 1947 - 1959,
    Journal articles | 2010
    Islam MS; Pickering KL; Foreman NJ, 2010, 'Influence of Hygrothermal Ageing on the Physico-Mechanical Properties of Alkali Treated Industrial Hemp Fibre Reinforced Polylactic Acid Composites', Journal of Polymers and the Environment, 18, pp. 696 - 704,
    Journal articles | 2010
    Islam MS; Pickering KL; Foreman NJ, 2010, 'Influence of accelerated ageing on the physico-mechanical properties of alkali-treated industrial hemp fibre reinforced poly(lactic acid) (PLA) composites', Polymer Degradation and Stability, 95, pp. 59 - 65,
    Journal articles | 2010
    Islam MS; Pickering KL; Foreman NJ, 2010, 'Influence of alkali treatment on the interfacial and physico-mechanical properties of industrial hemp fibre reinforced polylactic acid composites', Composites Part A: Applied Science and Manufacturing, 41, pp. 596 - 603,
    Journal articles | 2009
    Islam MS; Pickering KL; Foreman NJ, 2009, 'Curing kinetics and effects of fibre surface treatment and curing parameters on the interfacial and tensile properties of hemp/epoxy composites', Journal of Adhesion Science and Technology, 23, pp. 2085 - 2107,
    Journal articles | 2008
    Uddin MT; Islam MS; Islam MA; Abedin MZ, 2008, 'Uptake of phenol from aqueous solution by burned water hyacinth', Polish Journal of Chemical Technology, 10, pp. 43 - 49,
    Journal articles | 2007
    Islam MS; Pickering KL, 2007, 'Influence of alkali treatment on the interfacial bond strength of industrial hemp fibre reinforced epoxy composites: Effect of variation from the ideal stoicheometric ratio of epoxy resin to curing agent', ADVANCED MATERIALS AND PROCESSING IV, 29-30, pp. 319 - 322,
    Journal articles | 2007
    Uddin MT; Islam MS; Abedin MZ, 2007, 'Adsorption of phenol from aqueous solution by water hyacinth ash', ARPN Journal of Engineering and Applied Sciences, 2, pp. 11 - 17,
    Journal articles | 2004
    Mottaleb MA; Abedin MZ; Islam MS, 2004, 'Determination of volatile organic compounds in river water by solid phase extraction and gas chromatography', Journal of Environmental Sciences, 16, pp. 497 - 501,
    Journal articles | 2003
    Mottaleb MA; Abedin MZ; Islam MS, 2003, 'Determination of Benzene, Toluene, Ethylbenzene and Xylene in River Water by Solid-Phase Extraction and Gas Chromatography', Analytical Sciences, 19, pp. 1365 - 1369,
  • Conference Abstracts | 2022
    Islam M; Chang W; Pearce G; Djukic L; Benninger L; Wang C, 2022, 'Multiscale composites for cryogenic liquid hydrogen fuel tank', in PACIFIC POLYMER CONFERENCE (PPC17) 2022, Brisbane, Australia, presented at PACIFIC POLYMER CONFERENCE (PPC17) 2022, Brisbane, Australia, 11 December 2022 - 14 December 2022
    Conference Presentations | 2021
    Cheng W; Rose F; Islam M; Kinloch A; Wang C, 2021, 'Computational Modelling of Matrix Microcracking and Toughening Effect of Nano-scale Fillers for Multiscale Composite Laminates', presented at 12th International Conference on Structural Integrity and Failure (SIF2021), Melbourne, Australia, 05 December 2021
    Patents | 2021
    Islam M; Benninger LF; Wang C-H, 2021, Storage Vessels with Fiber Composite Reinforcement, Patent No.
    Conference Papers | 2021
    Islam M; Chang W; Rose F; Wu S; Kinloch A, 2021, 'Toughening fibre composites for the extreme cold in deep space', Melbourne, Australia, presented at 12th International Conference on Structural Integrity and Failure (SIF2021), Melbourne, Australia, 05 December 2021
    Conference Presentations | 2021
    Islam M; Chang W; Wu S; Rose F; Kinloch T; Wang C-H, 2021, 'Development of fracture toughness enhancement technology with nanoparticle incorporated multiscale carbon-epoxy composites', presented at 12th International Conference on Structural Integrity and Failure (SIF2021), Melbourne, Australia, 05 December 2021
    Conference Papers | 2021
    Tihin G; Wang C-H; Islam M, 2021, 'Use of Nanoparticles to Produce Multiscale Carbon-Epoxy Composite Laminates for Cryogenic Liquid Hydrogen Fuel Tank', Virtual Congress, presented at 10th Australasian Congress on Applied Mechanics (ACAM10), Virtual Congress, 29 November 2021 - 01 December 2021
    Conference Abstracts | 2020
    Islam M; Wang C-H, 2020, 'Nanoparticle toughened multiscale carbon-epoxy laminated composites for cryogenic liquid hydrogen fuel tank', in International Conference on Nanoscience and Nanotechnology (ICONN 2020), Brisbane, presented at International Conference on Nanoscience and Nanotechnology (ICONN 2020), Brisbane, 09 February 2020 - 13 February 2020
    Conference Abstracts | 2019
    Islam M; Chang W; Wang C, 2019, 'Incorporation of nanoscale materials to toughen fibre reinforced composites for cryogenic applications​', in 13th International Conference on Mechanical Behaviour of Materials (ICM-13), Melbourne, Australia, presented at 13th International Conference on Mechanical Behaviour of Materials (ICM-13), Melbourne, Australia, 11 June 2019 - 14 June 2019
    Conference Papers | 2019
    Islam M; Pearce G; Djukic L; Benninger L; Wang C, 2019, 'Development of multiscale toughening technique to address the micro-cracking problem of composites at cryogenic temperature', in TWENTY-SECOND INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS (ICCM22), Melbourne, Australia, presented at TWENTY-SECOND INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS (ICCM22), Melbourne, Australia, 11 August 2019 - 16 August 2019,
    Conference Abstracts | 2018
    Islam M; Wang C, 2018, 'Toughening of nanocomposites for applications in cryogenic fuel tank', in Proceedings of 22nd International Conference on Advanced Materials and Nanotechnology, 22nd International Conference on Advanced Materials and Nanotechnology, Tokyo, Japan, September 19-21, 2018, Tokyo, Japan, presented at 22nd International Conference on Advanced Materials and Nanotechnology, Tokyo, Japan, September 19-21, 2018, Tokyo, Japan
    Conference Abstracts | 2018
    Islam M, 2018, 'KEYNOTE PRESENTATION ON Nanomaterials in polymer composites for applications from aerospace and corrosion protection to energy storage', in Proceedings of 22nd International Conference on Advanced Materials and Nanotechnology, 22nd International Conference on Advanced Materials and Nanotechnology, Tokyo, Japan, September 19-21, 2018, Tokyo, Japan, presented at 22nd International Conference on Advanced Materials and Nanotechnology, Tokyo, Japan, September 19-21, 2018, Tokyo, Japan
    Conference Papers | 2012
    Islam MS; Tong L; Falzon PJ, 2012, 'Metal surface profile and residual stress: Persuasion of adhesion', Sydney, NSW, Australia, presented at 22nd Australasian Conference on the Mechanics of Structures and Materials ACMSM 22, Sydney, NSW, Australia, 11 December 2012 - 14 December 2012
    Conference Abstracts | 2010
    Islam M; Miao M; Finn N, 2010, 'Influence of kenaf fibre preform processing routes on the mechanical properties of thermoplastic composites', in Proceedings of the 5th CSIRO Advanced Materials Conference and Workshops (CAM2010), Melbourne, Australia, presented at The 5th CSIRO Advanced Materials Conference and Workshops (CAM2010), Melbourne, Australia
    Conference Abstracts | 2010
    Islam M; Miao M; Finn N, 2010, 'Optimization of processing conditions for flax reinforced Acrodur composites', in Proceedings of the 5th CSIRO Advanced Materials Conference and Workshops (CAM2010), Melbourne, Australia, presented at Advanced Materials Conference and Workshops (CAM2010), Melbourne, Australia
    Theses / Dissertations | 2009
    Islam MS, 2009, The influence of fibre processing and treatments on hemp fibre/epoxy and hemp fibre/PLA composites
    Conference Papers | 2007
    Islam MS; Pickering KL, 2007, 'Influence of alkali treatment on the interfacial bond strength of industrial hemp fibre reinforced epoxy composites: Effect of variation from the ideal stoicheometric ratio of epoxy resin to curing agent', in Advanced Materials Research, pp. 319 - 322,
    Conference Papers | 2005
    Islam MS; Pickering KL; Beckermann GW, 2005, 'The effect of fibre treatment using alkali on industrial hemp fibre/epoxy resin composites', in Proceedings of the International Conference on Mechanical Engineering …, 6th International Conference on Mechanical Engineering,(ICME2005), Dhaka, Bangladesh, presented at 6th International Conference on Mechanical Engineering,(ICME2005), Dhaka, Bangladesh, 28 December 2005 - 30 December 2005

  • Chun H Wang, Garth Pearce, Mohammad S Islam, Francis Rose, Anthony Kinloch, Carbon Fibre Composites for Liquid Hydrogen Storage: Hybrid Toughening and Anti-leakage Design, ARC Discovery project, DP230101204, 2022
  • Jin Zhang, Chun H Wang, Mohammad S Islam, David Officer, Advanced High Temperature Composites for Solid Rocket Motors in Space Launch Vehicles, NSW Space Research Network (SRN) Research Pilot Project, SRN-PILOT-2022-20, 2022
  • Chun H Wang, Mohammad S Islam, Liyong Tong,Microcrack suppression in lightweight and recyclable thermoplastic-fibre composites for cryogenic liquid hydrogen storage tank -NSW Space Research Network (SRN) Research Pilot Project, RG220491, 2022
  • Chun H. Wang, Mohammad S. Islam, Garth Pearce, Manufacture and commercialisation of composite tanks for the hydrogen and space transport markets - Advanced Manufacturing Growth Centre Commercialisation Fund Shared Grant, RG211547, 2021
  • Chun H. Wang, Mohammad S. Islam, Garth Pearce, Suppression of microcracking in composite tank for cryogenic liquid hydrogen,RG204448, 2020
  • Chun H. Wang, Mohammad S. Islam, Garth Pearce, Suppression of microcracking in composite tank for cryogenic liquid hydrogen,RG192377, 2019
  • Liyong Tong and Mohammad S Islam, Environmental aging effect on the durability of fibre-reinforced polymer composite materials for aircraft structures, Defence Science and Technology Group, 2017

  • Foundation for Science and Technology Post-Doctoral Fellowship Award, Portugal (2011-2013)
  • New Zealand Post Graduate Study Abroad Award (NZPSAA) (2007)
  • Department of Engineering Scholarship, The University of Waikato (2007)
  • The University of Waikato Scholarship (2007)
  • Technology for Industry Fellowship (TIF) Scholarship, New Zealand (2004-2007)
  • Departmental Scholarship of Materials and Process Engineering, New Zealand (2004-2005)

My Research Supervision

  • MrOthman Abu Laban (PhD candidate):Novel composite structuresfor composite cryotanks

My Teaching

Composite Cryotanks - Vertically Integrated Projects (VIP)

MMAN3400 Mechanics of Solids 2